Product description: The HPerformance 100mm 4" intake system is one of the largest intake systems on the market. It features a 100mm pipe diameter, which is adapted to the turboinlet itself with a silicone reducer. The 100mm 4" intake system increases the visible performance over a 90mm 3.5" intake system and should be used in any vehicle over 500HP/600NM. The system has a well-designed bracket to prevent any contact in the engine compartment. By using aluminum has It has good heat exchange and is very light weight. It has no negative side effects/risk effects like carbon systems in terms of melting, fading/fading and deformation.Moreover, aluminum has very good heat exchange capabilities, so a hot intake manifold becomes cold again extremely quickly after the engine is stopped.It does not retain heat. Please Note: Any of our items are not deisgned for beeing used street legal. Products that are street legal are marked as such. The offered items are for racing application only and must be installed by professional workshops with corresponding know how. If you want to install the parts on your own, please inform yourself up front, if you are able to handle the installation. You can also ask our technicans on the phone. We cannot take back items that have been incorrectly installed.

Product description: The HPerformance turboinlet is the ideal complement to the HPerformance open 100mm intake system. The turboinlet makes it possible to generate the greatest possible air flow in front of the turbocharger, which not only improves the response behavior, but also significantly increases the maximum throughput. Just installing the inlet on an original CEP CZG generates an increase in performance of 11PS and 18NM. In combination with an open intake, the inlet unfolds its full performance. Then even up to 15hp and 27NM increase can be measured. The inlet is absolutely necessary on vehicles that drive an upgrade turbocharger (more than 450 hp). On the TC610XT turbocharger, performances over 600hp are only possible through the inlet. Thanks to the laser manufacturing technology, this inlet has a wall thickness of only 1.6mm and has a much larger volume than compareable cast inlets. Please Note: Any of our items are not deisgned for beeing used street legal. Products that are street legal are marked as such. The offered items are for racing application only and must be installed by professional workshops with corresponding know how. If you want to install the parts on your own, please inform yourself up front, if you are able to handle the installation. You can also ask our technicans on the phone. We cannot take back items that have been incorrectly installed.

Product description: The HPerformance turboinlet is the ideal complement to the HPerformance open 100mm intake system. The turboinlet makes it possible to generate the greatest possible air flow in front of the turbocharger, which not only improves the response behavior, but also significantly increases the maximum throughput. Just installing the inlet on an original CEP CZG generates an increase in performance of 11PS and 18NM. In combination with an open intake, the inlet unfolds its full performance. Then even up to 15hp and 27NM increase can be measured. The inlet is absolutely necessary on vehicles that drive an upgrade turbocharger (more than 450 hp). On the TC610XT turbocharger, performances over 600hp are only possible through the inlet. Thanks to the laser manufacturing technology, this inlet has a wall thickness of only 1.6mm and has a much larger volume than compareable cast inlets. Please Note: Any of our items are not deisgned for beeing used street legal. Products that are street legal are marked as such. The offered items are for racing application only and must be installed by professional workshops with corresponding know how. If you want to install the parts on your own, please inform yourself up front, if you are able to handle the installation. You can also ask our technicans on the phone. We cannot take back items that have been incorrectly installed.

Product description: The HPerformance turboinlet is the ideal complement to the HPerformance open 100mm intake system. The turboinlet makes it possible to generate the greatest possible air flow in front of the turbocharger, which not only improves the response behavior, but also significantly increases the maximum throughput. Just installing the inlet on an original CEP CZG generates an increase in performance of 11PS and 18NM. In combination with an open intake, the inlet unfolds its full performance. Then even up to 15hp and 27NM increase can be measured. The inlet is absolutely necessary on vehicles that drive an upgrade turbocharger (more than 450 hp). On the TC610XT turbocharger, performances over 600hp are only possible through the inlet. Thanks to the laser manufacturing technology, this inlet has a wall thickness of only 1.6mm and has a much larger volume than compareable cast inlets. Please Note: Any of our items are not deisgned for beeing used street legal. Products that are street legal are marked as such. The offered items are for racing application only and must be installed by professional workshops with corresponding know how. If you want to install the parts on your own, please inform yourself up front, if you are able to handle the installation. You can also ask our technicans on the phone. We cannot take back items that have been incorrectly installed.