Product description: The HPerformance 100mm 4" intake system is one of the largest intake systems on the market. It features a 100mm pipe diameter, which is adapted to the turboinlet itself with a silicone reducer. The 100mm 4" intake system increases the visible performance over a 90mm 3.5" intake system and should be used in any vehicle over 500HP/600NM. The system has a well-designed bracket to prevent any contact in the engine compartment. By using aluminum has It has good heat exchange and is very light weight. It has no negative side effects/risk effects like carbon systems in terms of melting, fading/fading and deformation.Moreover, aluminum has very good heat exchange capabilities, so a hot intake manifold becomes cold again extremely quickly after the engine is stopped.It does not retain heat. Please Note: Any of our items are not deisgned for beeing used street legal. Products that are street legal are marked as such. The offered items are for racing application only and must be installed by professional workshops with corresponding know how. If you want to install the parts on your own, please inform yourself up front, if you are able to handle the installation. You can also ask our technicans on the phone. We cannot take back items that have been incorrectly installed.

Product description: The HPerformance turboinlet is the ideal complement to the HPerformance open 100mm intake system. The turboinlet makes it possible to generate the greatest possible air flow in front of the turbocharger, which not only improves the response behavior, but also significantly increases the maximum throughput. Just installing the inlet on an original CEP CZG generates an increase in performance of 11PS and 18NM. In combination with an open intake, the inlet unfolds its full performance. Then even up to 15hp and 27NM increase can be measured. The inlet is absolutely necessary on vehicles that drive an upgrade turbocharger (more than 450 hp). On the TC610XT turbocharger, performances over 600hp are only possible through the inlet. Thanks to the laser manufacturing technology, this inlet has a wall thickness of only 1.6mm and has a much larger volume than compareable cast inlets. Please Note: Any of our items are not deisgned for beeing used street legal. Products that are street legal are marked as such. The offered items are for racing application only and must be installed by professional workshops with corresponding know how. If you want to install the parts on your own, please inform yourself up front, if you are able to handle the installation. You can also ask our technicans on the phone. We cannot take back items that have been incorrectly installed.

Product description: The HPerformance 125mm 5" intake system is one of the biggest intakes on the market. It comes with a 100mm 4"oversize- turboinlet, that is adapted with a silicone reducer to the intake pipe itself. The 125mm 5" intake kit gains visible power over an 100mm 4" intake system and should be used in any car above 800HP / 750WHP. The system has a well designed holder bracket to prevent any touching in the engine bay. By using aluminium it has a great heat exchange and ist very light. It has no negative side / risk affects than carbon systems do in terms of melting, fading / bleaching and Deformation. Due to the material, aluminium has an excellent cooling effect and air temp exchange effect. Please Note: Any of our items are not deisgned for beeing used street legal. Products that are street legal are marked as such. The offered items are for racing application only and must be installed by professional workshops with corresponding know how. If you want to install the parts on your own, please inform yourself up front, if you are able to handle the installation. You can also ask our technicans on the phone. We cannot take back items that have been incorrectly installed.

Product description: The HPerformance turboinlet is the ideal complement to the HPerformance open 100mm intake system. The turboinlet makes it possible to generate the greatest possible air flow in front of the turbocharger, which not only improves the response behavior, but also significantly increases the maximum throughput. Just installing the inlet on an original CEP CZG generates an increase in performance of 11PS and 18NM. In combination with an open intake, the inlet unfolds its full performance. Then even up to 15hp and 27NM increase can be measured. The inlet is absolutely necessary on vehicles that drive an upgrade turbocharger (more than 450 hp). On the TC610XT turbocharger, performances over 600hp are only possible through the inlet. Thanks to the laser manufacturing technology, this inlet has a wall thickness of only 1.6mm and has a much larger volume than compareable cast inlets. Please Note: Any of our items are not deisgned for beeing used street legal. Products that are street legal are marked as such. The offered items are for racing application only and must be installed by professional workshops with corresponding know how. If you want to install the parts on your own, please inform yourself up front, if you are able to handle the installation. You can also ask our technicans on the phone. We cannot take back items that have been incorrectly installed.

Product description: This package contains the RACE SERIES intercooler, the 5 inch 125mm open intake system and the 3,14 inch 80mm charge pipe and billet throttle body elbow.  The intake system improves the flow on the cold side of the turbo (intake side) and the intercooler does a significant drop in charge air temperature. On the 3,14 inch 80mm outlet side of the intercooler, the charge pipe and throttle body continue this huge diameter up to the inlet manifold. Vehicles, that run more than 2 bar / 29 psi over time doe benefit significant by the pressure drop improvement due to the big size of the outlet and charge pipe of the intercooler. Also, the stock electrical blow off is not designed for these boost / power levels. This is why we add a mechanical TIAL / TURBOSMART blow off valve that also generates a pleasant blow off sound when releasing the gas pedal.The kit does not only means a significant improvement in the intake air temperature, but also the improved fresh air supply through the intake in conjunction with the associated turbo inlet. The intercooler's cooling performance is dimensioned so that it can cool every conceivable performance on the 2.5 TFSI up to 1100HP without hesitation or constantly. The intake is also designed for outputs of up to 1000HP.  The combination achieves a performance increase of up to 40HP and 90NM (reproducible) on a standard vehicle  For further technical information, please see the descriptions of the individual items. Important:Please always have work on vehicles carried out by trained specialist personnel. Bumpers of modern vehicles have various sensors and controls that can cause problems if handled improperly. We do not provide any guarantee/guarantee/advice for improper installations.Please note:In accordance with our general terms and conditions, we would like to expressly point out again at this point that all items that are not expressly marked with a TÜV / EC approval do not have approval in the area of ​​the StVO. These items must therefore be typed individually by the user before they are used on public roads. Otherwise, these products must be used in racing.

Product description: The RACE Series intercooler & 125mm open intake package not only means a significant improvement in the intake air temperature, but also the improved fresh air supply through the intake in conjunction with the associated turbo inlet. The intercooler's cooling performance is dimensioned so that it can cool every conceivable performance on the 2.5 TFSI up to 1100HP without hesitation or constantly. The intake is also designed for outputs of up to 1000HP.  The combination achieves a performance increase of up to 35HP and 80NM (reproducible) on a standard vehicle  For further technical information, please see the descriptions of the individual items. Important:Please always have work on vehicles carried out by trained specialist personnel. Bumpers of modern vehicles have various sensors and controls that can cause problems if handled improperly. We do not provide any guarantee/guarantee/advice for improper installations.Please note:In accordance with our general terms and conditions, we would like to expressly point out again at this point that all items that are not expressly marked with a TÜV / EC approval do not have approval in the area of ​​the StVO. These items must therefore be typed individually by the user before they are used on public roads. Otherwise, these products must be used in racing.

Product description: The Sport Series intercooler & 125mm open intake package not only means a significant improvement in the intake air temperature, but also the improved fresh air supply through the intake in conjunction with the associated turbo inlet. The intercooler's cooling performance is dimensioned so that it can cool every conceivable performance on the 2.5 TFSI up to 900HP without hesitation or constantly. The intake is also designed for outputs of up to 1000HP.  The combination achieves a performance increase of up to 30HP and 70NM (reproducible) on a standard vehicle  For further technical information, please see the descriptions of the individual items. Important:Please always have work on vehicles carried out by trained specialist personnel. Bumpers of modern vehicles have various sensors and controls that can cause problems if handled improperly. We do not provide any guarantee/guarantee/advice for improper installations.Please note:In accordance with our general terms and conditions, we would like to expressly point out again at this point that all items that are not expressly marked with a TÜV / EC approval do not have approval in the area of ​​the StVO. These items must therefore be typed individually by the user before they are used on public roads. Otherwise, these products must be used in racing.

Product description: The HPerformance 125mm 5" intake system is one of the biggest intakes on the market. It comes with a 100mm 4"oversize- turboinlet, that is adapted with a silicone reducer to the intake pipe itself. The 125mm 5" intake kit gains visible power over an 100mm 4" intake system and should be used in any car above 800HP / 750WHP. The system has a well designed holder bracket to prevent any touching in the engine bay. By using aluminium it has a great heat exchange and ist very light. It has no negative side / risk affects than carbon systems do in terms of melting, fading / bleaching and Deformation. Due to the material, aluminium has an excellent cooling effect and air temp exchange effect. The "aif baffle" completes this product and improves not only the intake temperatur, it does lift the power up to 8HP and 14N. No more warm air in the filtersystem. Please Note: Any of our items are not deisgned for beeing used street legal. Products that are street legal are marked as such. The offered items are for racing application only and must be installed by professional workshops with corresponding know how. If you want to install the parts on your own, please inform yourself up front, if you are able to handle the installation. You can also ask our technicans on the phone. We cannot take back items that have been incorrectly installed.

Product description: The HPerformance turboinlet is the ideal complement to the HPerformance open 100mm intake system. The turboinlet makes it possible to generate the greatest possible air flow in front of the turbocharger, which not only improves the response behavior, but also significantly increases the maximum throughput. Just installing the inlet on an original CEP CZG generates an increase in performance of 11PS and 18NM. In combination with an open intake, the inlet unfolds its full performance. Then even up to 15hp and 27NM increase can be measured. The inlet is absolutely necessary on vehicles that drive an upgrade turbocharger (more than 450 hp). On the TC610XT turbocharger, performances over 600hp are only possible through the inlet. Thanks to the laser manufacturing technology, this inlet has a wall thickness of only 1.6mm and has a much larger volume than compareable cast inlets. Please Note: Any of our items are not deisgned for beeing used street legal. Products that are street legal are marked as such. The offered items are for racing application only and must be installed by professional workshops with corresponding know how. If you want to install the parts on your own, please inform yourself up front, if you are able to handle the installation. You can also ask our technicans on the phone. We cannot take back items that have been incorrectly installed.